Embedded Files
1
1
Double click on the stand you wish to edit the colour for.
Click on the Pen icon located next to the Stand Type drop down box, as highlighted below in Red.
Note: When you edit the colour for this stand, it will also change the colour for all other stands with the same type.
2
2
The below box will now appear showing a list of all your Stand Types.
Click on the colour box next to the name to change the colour and other options as explained in Step 3.
When you have finished, click OK. Then click OK again on the Stand Details box. Your stand colour will now be updated.
3
3
This is the Colour Fill Options box. See below descriptions of each item.
Type:
Type:
This allows you to choose how the Stand is shaded. The most common is Solid but you can also use Single, Double or Cross hatch lines.
Options:
Options:
Pitch: This is only available when Single, Double or Cross hatch type is selected and specifies how large the gap is in between each hatch line.
Offset: This is only available when the Double hatch line type is selected and specifies the gap between the 2 hatch lines.
Angle: This is available when Solid (with Gradient ticked) or Single, Double or Cross hatch type is selected. For hatch types it lets you specify the angle of the hatch lines. For Solid with the Gradient option ticked it allows you to specify the angle of the gradient.
Line Width: This is only available when Single, Double or Cross hatch type is selected and specifies the thickness of each hatch line.
Colour:
Colour:
Gradient (tick box): This is only available when Solid type is selected. Tick this to allow you to choose 2 colours.
Colour 1: This is available when Solid, Single, Double or Cross hatch type is selected. Choose a colour from the drop down box or move your mouse over something on your screen and press CTRL+1 to grab the colour.
Colour 2: This is only available when Solid type is selected and the Gradient tick box is ticked. This allows you select the 2nd colour of your gradient fill or move your mouse over something on your screen and press CTRL+2 to grab the colour.
Select Item to Match Colour From (drop down box): If there are colours already used on your floorplan for other Zones, Hall Boundaries or Stands that you want to use on your new Zone, click this box and select as required.
Page updated
Report abuse